Budget: $5,000

Build Must include Windows 11 USB (135.99) Need (CPU, CPU Cooler (Prefer 420mm Arctic Liquid Freezer II), Motherboard, atleast 64gb of Ram (Preferably 32x2), SSD Only (4TB), 4090 is a must, Prefer a case to keep parts cool with good airflow, Prefer Titanium rated PSU, need thermal paste, and/or fans if build does not have sufficient fans. I prefer performance over appearance.

https://pcpartpicker.com/list/6HbZNc
This is somewhat the idea of what it will look like, you can add extra lights / replace front fans .

The Thermal Paste pre-applied to the water cooler is fine, otherwise you could use something like Noctua to lower the Temps, but it will only be like a 2-3 C Temp Difference at most.
Sometimes hard to apply enough just right.

Maybe instead of 2x 32" monitors, get a 49" Ultra Wide.

The Cooling is pretty nice, Max Gaming even on the hottest summer days.

This post was edited by conetopia on Apr 7 2023 11:37pm

There's a gangster way to spend that $5k USD budget, I should have time later to drum something up for you.

Can you specify if you require monitor/peripherals and what resolution/hz are you trying to obtain?

eh peripherals are very questonable
and should go am5 7950x3d imho

Ew

buy a mobo that will support newer cpus for little while longer
or buy pretty much a dead socket hmm that sounds ew

and those peripherals are gross to even add to any system

This post was edited by yupitsmeh on Apr 12 2023 09:35pm

I don’t need monitor or anything else just the tower and all parts inside.

https://pcpartpicker.com/list/bjktv3

The mobo is in stock on Amazon https://www.amazon.com/NZXT-Z790-Motherboard-N7-Z79XT-W1-connectivity/dp/B0BFZXDVNY?th=1
The case is in stock on Newegg https://www.newegg.com/nzxt-h9-flow-all-white-atx-mid-tower/p/N82E16811146346

Add in you Windows, I'd personally just buy a key and create the thumb drive myself for $20.

https://pcpartpicker.com/list/c6zc9r

I don't know if you're OK to watercool yourself, but imo if you're spending that much $$$ I'd custom loop it

EKWB or DazMode/FrozenCPU

Distroplate+Pump combo for Dynamic Evo, block, tubing, fittings, etc (no need to custom loop GPU but still within budget, can just do CPU for decent price)

Leaves you with enough money to custom loop without sacrificing any performance/parts

GL on whatever you do

This post was edited by MadMardi on Apr 13 2023 03:49pm