Box is almost 2 feet too small. Just something I built not a professional box. Was built for a different speaker my homie swore by but I had to recone after 5 minutes then a couple weeks after that it literally caught fire.

Was going to have a box built but I am way up in the boonies right now didn’t want to spend that kind of money after buying a $1,800 speaker >_>

It is in a suburban also. Took the third row out and built a custom floor basically. Just behind the second row is a “box” built to hide the batteries (wires come up from beneath) and the amp sits on that. Speaker box is behind that.

Super clean setup, spent a couple weeks building it. Guess I was still burnt out when I upgraded the sub.

Ha my hatch is still fine but the plastic panels from the second row back fall off every week or so. 2015 Yukon pretty cheap interior idk what the 08 was like inside.

This post was edited by WickedDarkJuggalos on Nov 27 2021 05:27pm

ah gotcha. I can design you a box or if you want to pay for one you can hit up Drew Jones on facebook.

my yukon was a 04 I upgraded to an 08 tahoe. The interior was pretty solid just the hatch from the lows



/e as you can see my rear wiper literally snapped off leaving a nice 4" diameter golfball size hole in my hatch literally rain would LEAK into the cracks and cover my subs/box and equipment there was ZERO was to mitigate this seals were all solid truck was solid but im telling you those 30hz lows with 200 inches of port straight destroyed my car. prob why I didnt hit a 150 cause I was more hitting the lows too big of a box etc.

This post was edited by DatNiggaJesse on Nov 27 2021 05:36pm

I only do cash and don’t have Facebook. Is your boy in the northeast?

He lives in louiville but he does it all online, does cut sheets/3d design and whatnot, charges $40-60 depending how complex. He's very very known and reliable.

I also live in the northeast bud, where at? maybe we can meetup

If you cant buy a design ill gladly draw one up on sketch for free and do up a cut sheet for you. I've done a ton of boxes and whatnot.



I did this box too single 18 nsv3 on 4500w @ 1 ohm doing a solid 147.

This post was edited by DatNiggaJesse on Nov 27 2021 05:42pm

same box fi btl n2 neo 18 with corey dean SPL recone



this box too (4) 12" obsidians

https://www.youtube.com/watch?v=1M28Jkl5SaU&ab_channel=DJSUNDOWN

made this box (2) kicker CVX 12's on a Kicker ZX2500.1

https://www.youtube.com/watch?v=qUrwkbUPwJY&ab_channel=EXOabigdeal

this box PSI 18" Platform 2 on a AP1500.1:

https://www.youtube.com/watch?v=9PzliPwMZ_w&ab_channel=DJSUNDOWN

this box (2) DC Level 3 15's on DC 1.2K

https://www.youtube.com/watch?v=FdIzoZ_AK60&ab_channel=DJSUNDOWN

This post was edited by DatNiggaJesse on Nov 27 2021 05:54pm

This was prob my deadliest box... was like 31hz @ 6 cubes with 150 inches of port with a original Fi Btl N2 18" on a Crescendo 2000BC @ 1o hm in a 04 trailblazer




same setup hair trick in car with all windows up..

https://www.youtube.com/watch?v=YtNA4WswtqA&t=1s&ab_channel=DJSUNDOWN

This post was edited by DatNiggaJesse on Nov 27 2021 05:57pm

same setup hair trick in car with all windows up..

I probably wait until it warms back up to do anything. Ima remember you tho closest box maker I know is in Maryland.

can you help?

Did you try to restart them?