My computer goes to bsod and tells me It Ran into a problem and then I did a RAM memory diagnostic and something is wrong with It

I have to turn on computer like 7-8 times until It load Windows

So alternatively, I wanted to try to unplug each memory RAM and try them separately to see which one is not working properly

Currently running sockets of 16GB each

Can I try 1 by one or do I need to put 2 at once?

You need to just figure out which slot is the boot slot on the motherboard and then do it 1 by 1 like that. That's how I'd do it but I'm no computer expert.

This post was edited by CrackerSJ on Jul 24 2022 03:50pm

Im bad at computers not sure about Boot slot 🥺

Do you know what motherboard you have?

yes I currently have x570 UD

I just tried some combinations, it gave me an error when I plugged last slot in, tried that same RAM on second slot, and it didnt fail to load. Then tried the one I replaced on the 4th one and its working properly now... not sure what happened... hopefully it is fixed.


Installed chipset drivers from motherboard and nvidia drivers too, before that, not sure if that had something to do with it

This post was edited by play on Jul 24 2022 04:59pm

Have you tried downloading more ram?

Also check what slots there in - I had issues when I put in slot 2 and 4 and the problem went away when I put them in slot 1 and 3. Weird as either way its still dual channel.

yes did it and it works now