Quote (RoOme @ 23 Apr 2013 09:11)
что за манипуляции такие? @_@
Disconnect all cables and wireless clients.
Do a 30/30/30 reset on router using the small reset button on the bottom, not back, of the unit.
Connect 1 Lan cable to pc doing the flash.
Log into Linkysys Web Interface Firmware Upgrade page at 192.168.1.1 and flash the firmware E2500 Trailed Initial Flash Build
Wait 5 minutes to assure flash integrity.
Power cycle by unplugging E2500 for 10 seconds.
Plug E2500 back in and wait about 3 minutes until it finishes booting.
Do a 30/30/30 reset using the small button on the bottom, not back, of the unit on the router.
Wait 3 minutes and log into web interface.
You are done.