3050mm long
*500mm*2pieces(1000mm) wide
*80mm thick

bark and tree curves on one side
straight on the other side
not sanded properly yet








Gone leave it just like it is, just smooth a bit up where my arms rest
and a transparent placemat to put my keyboard + mouse on

Once you get it nice and sanded, will you apply an oil or poly?
polyeurethane would add some protection from scratches or spills.

looks more like a picnic table seat than a desk

unless you glue them together?

i hope this fares better than your bonsai tree

Dont think i wana do that.
Its gone get dirty, and therefore its alive.
Especially when smoking, ashes are gone fill the cracks

Probably after a few years, the board will start to give off dirt

the planks are also a bit warped, I'm satisfied with a 5mm to 15mm gap in the middle, where the planks connect

One man's slab is a Tommy's treasure

You're going to completely ruin that piece of wood if you don't sand and clear coat it. You're also just going to be setting things on a dirty ass piece of wood?

Looks gross, perfect for what you're going for.

looks like low quality firewood

Impressive, very nice.