d2jsp
Log InRegister
d2jsp Forums > Off-Topic > International > Polska > Komputer: Czesci, Oprogramowanie, Itp > Temat Oficjalny W 100%
Prev1107108109110111875Next
Add Reply New Topic New Poll
Member
Posts: 41,017
Joined: Jul 4 2005
Gold: 871.28
Oct 25 2011 03:15pm
Quote (Specjalista @ 25 Oct 2011 23:08)
na ile lataja wasze i5/i7 2x00k ?? mhz i napiecie


4.7, bazowy profil w setupow asrocka.
2600k + fortis.

This post was edited by markov on Oct 25 2011 03:15pm
Banned
Posts: 282
Joined: Oct 5 2011
Gold: 0.00
Warn: 10%
Oct 25 2011 03:17pm
Quote (markov @ Oct 25 2011 11:15pm)
4.7, bazowy profil w setupow asrocka.
2600k + fortis.


4,7 turbo?
ile ci wali napiecie pod obciazeniem?
Member
Posts: 41,017
Joined: Jul 4 2005
Gold: 871.28
Oct 25 2011 03:22pm
Quote (Specjalista @ 25 Oct 2011 23:17)
4,7 turbo?
ile ci wali napiecie pod obciazeniem?


poprawka, jednak 4.4 mam teraz, core voltage 1.328v, mnoznik x44.

Quote (Specjalista @ 25 Oct 2011 23:24)
a jak tempy?


teraz nie bede odpalal jakiegos renderingu na kilkanascie minut, ale nie wiecej jak 60 przy dlugotrwalym obciazeniu z tego co pamietam.

Teraz mam 35-45 po bf3 / renderowaniu kilku klatek by sprawdzic staty pod obciazeniem.

This post was edited by markov on Oct 25 2011 03:25pm
Banned
Posts: 282
Joined: Oct 5 2011
Gold: 0.00
Warn: 10%
Oct 25 2011 03:24pm
Quote (markov @ Oct 25 2011 11:22pm)
poprawka, jednak 4.4 mam teraz, core voltage 1.328v, mnoznik x44.


a jak tempy?

ja teraz testuje nowego i5
4300mhz 1.25V
max 60C


This post was edited by Specjalista on Oct 25 2011 03:26pm
Member
Posts: 6,262
Joined: Apr 2 2006
Gold: 6.66
Oct 25 2011 03:38pm
Quote (Specjalista @ 25 Oct 2011 22:24)
a jak tempy?

ja teraz testuje nowego i5
4300mhz 1.25V
max 60C



To jakis seleket? Strasznie niskie napiecie.

Czym go sprawdzasz? Orthosem ?

This post was edited by groom on Oct 25 2011 03:39pm
Banned
Posts: 282
Joined: Oct 5 2011
Gold: 0.00
Warn: 10%
Oct 25 2011 03:40pm
Quote (groom @ Oct 25 2011 11:38pm)
To jakis seleket? Strasznie niskie napiecie.

Czym go sprawdzasz? Orthosem ?


occt
tez sie wlasnie dziwie :)

teraz idzie
4400/1.25

This post was edited by Specjalista on Oct 25 2011 03:41pm
Member
Posts: 6,262
Joined: Apr 2 2006
Gold: 6.66
Oct 25 2011 03:41pm
Quote (Specjalista @ 25 Oct 2011 22:40)
occt



Moj do stabilnosci jak skala na 4.0 potrzebuje 1.3V.
Banned
Posts: 282
Joined: Oct 5 2011
Gold: 0.00
Warn: 10%
Oct 25 2011 03:43pm
Quote (groom @ Oct 25 2011 11:41pm)
Moj do stabilnosci jak skala na 4.0 potrzebuje 1.3V.


ogolnie to nie chce zwiekszac napiecia standardowego do codziennego uzytku ile wycisne tyle bedzie

4400mhz/1.25V temp podskoczyly o 1-2C

This post was edited by Specjalista on Oct 25 2011 03:43pm
Banned
Posts: 282
Joined: Oct 5 2011
Gold: 0.00
Warn: 10%
Oct 25 2011 05:33pm
4500mhz
1.275V

na dzis starczy :D
Member
Posts: 29,117
Joined: Sep 7 2006
Gold: 6,207.00
Oct 26 2011 11:14am
Quote (EustachyMotyka @ 25 Oct 2011 19:06)
1. In XP, download and install .Net Framework 2.0 (32-bit) verison or .Net Framework 2.0 (64-bit) version and EasyBCD for your 32-bit (x86) or 64-bit (x86) XP.
NOTE: In XP, Net Framework is required to be installed to run the free program EasyBCD.

2. Run EasyBCD.
NOTE: This is required to repair the Windows 7 boot file and add XP to the Windows Boot Manager list.

3. On the left side of EasyBCD, click on the Add New Entry button. (See screenshot below)

A) In the top section under Operating Systems, click on the Windows tab. (See screenshot below)

B ) To the right of Type, select Windows NT/2k/XP/2k3 from the drop down menu. (See screenshot below)
WARNING: Be sure to leave the Automatically detect correct drive box checked.

C) To the right of Name, you can leave the default Microsoft Windows XP as the name to be displayed in the Windows Boot Manager, or you can type whatever name you would like to have instead. (See screenshot below)

D) Click on the Add Entry button. (See screenshot below)
http://www.sevenforums.com/attachments/tutorials/101534d1285946455-dual-boot-installation-windows-7-xp-w7-xp-7.jpg

4. On the left side of EasyBCD, click on the Bootloader Setup button, select (dot) the Install the Windows Vista/7 bootloader to the MBR option, and click on the Write MBR button. (See screenshot below)

http://www.sevenforums.com/attachments/tutorials/101536d1285946455-dual-boot-installation-windows-7-xp-w7-xp-9.jpg

5. Close EasyBCD.

6. Restart the computer to have the option to boot from Microsoft Windows XP or Windows 7. (See screenshot below)

http://www.sevenforums.com/attachments/tutorials/9099d1240933934-dual-boot-installation-windows-7-xp-example2.jpg

źródło: http://www.sevenforums.com/tutorials/8057-dual-boot-installation-windows-7-xp.html

/e sam używałem tej instrukcji przy instalacji win xp & 7 dual boot


Dzięki Stefan za konkret. Niestety okazało się, że moje mobo nie żyje, więc i tak nowa winda musi być.

Jaki fan do i5 2500k? Jakiej firmy dać po bokach (92mm x4) i jaki z tyłu (pod zasiłką (120mm))? Chcę ciszy.

This post was edited by Xasthur on Oct 26 2011 11:17am
Go Back To Polska Topic List
Prev1107108109110111875Next
Add Reply New Topic New Poll