Quote (Ghot @ Dec 10 2016 11:23pm)
Double check that the wires from the Case to the motherboard, are properly hooked up.
Double check that the RAM is installed in the proper slots.
Make sure the power cables for the 24 pin connector and the 4 or 8 pin CPU power connector.
Check all of these. Your mobo two power connectors: 24pin and 4pin. It also only has the two RAM slots so verify they are pressed all the way down so that the little clips on the sides are holding them in.
Does anything else turn on when you press the power? Gpu fans, CPU fans, case fans?
In your mobo box should be an instructions booklet that will tell you all of the pins and hookups. In the booklet it will tell you how to manually boot the mobo, typically this is done by shorting two pins. If the mobo boots and all your fans startup you might just have some of the pins connected wrong.