i got this evercool deep bomb thermal paste STC-02

and wanted to no if anyone has used before or what they think about it

if it matters going to use on my GPU

Should be fine, Just make sure to completely cover the GPU die, It's not like a CPU where you only have to get the inner 60%~ for it to cool properly.

Also, Make sure you don't get it on the PCB, I couldnt find if it was conductive or not..

Are you just re-applying the paste to your gpu?

well i built my pc back in 2011 and i have never replaced the thermal paste on my GPU it started heating up more then normal so i figured its prob about time

got any good youtube videos on applying thermal paste to GPU's?

p.s.
http://www.evercool.com.tw/categories/global/thermalcompound/stc-02/deepbomb.php

it ses its silicone free whatever that means

This post was edited by serpin on Aug 6 2016 07:17pm

boop

This post was edited by serpin on Aug 7 2016 06:55pm

Have you blow all the dust out of the GPU?

Replacing the paste on a GPU can be more complicated than the CPU. Just make sure you know what you're doing if you decide to do it.