Looking to do a full custom watercooling build in the new feature.
Not looking for budget pieces, but probably something in the 600-700$US area.

Must have
2x 360m raditors low profile 30mm +/-
200mm reservoir
Hard tubing
bending fittings.
6x PWM fans, quite once running at 1000-1200 RPM
CPU socket 1150/1151
2x GPU blocks, not quite sure which ones yet most likely 1070s

similar to this.

It'll cost nearly 1000 for everything. Not cheap getting into the water game

What's the expected price per piece?
Radiators, pump, tube, fittings, blocks, water+dye etc.

Yeah I saw your system is about 900$. I could accept that

No one up for the challenge?

Gpu blocks are about 100, cpu block is 70ish, rads pumps and reservoirs are all 60-80 each. A tool set for bending tunes is about 30 if you don't already have the tools plus you need a heat gun. Don't remember how much the tubing costs off the top of my head. Fittings are like $4 each and you need 2 per item. Premixed coolant is about 17 per litre.

I wouldn't recommend hard tubing for your first build.

the fittings will run u a lot just to let u know

lemme know what you come up with as a final price if you do indeed do the 1070 route

This