Installed my new 970 and Exo 212 and now at startup I get a fast bsod then the comp will reboot and do it again

Any ideas?

Didn't install the EVO 212 correctly...most probably.

Well I reinstalled the evo now I can't get any signal to my monitor from my New gpu my old gpu or my mobo tried everything and made sure everything was plugged in right.... Idk what to do nemore zzzz

motherboard may be shot now. I had an issue that I thought was my gpu and turned out my motherboard was bad. Same thing no video out from any gpu nor built in hdmi.

Working now... Unmounted the evo 212 fuck that Thng still get bsod so reinstalling Windows if that don't work I'll prob throw my comp out my second story window

flameeeeee

This post was edited by DaTz on Dec 30 2015 05:02pm

did you hook up the monitor to the VGA port on your motherboard?
if not, do that and boot it up.

if you get a signal and the temps are fine then your vid card needs to be RMA'd

oh you did that, its your mobo or psu
i'd bet mobo.

This post was edited by Penguins0690 on Dec 30 2015 05:37pm

i got everything to work ok.. but now my cpu runs at 100 c i reapplied thermal paste 3 times now and not sure whats wrong..100 is bad right?

check temp in bios after remounting the evo.. maybe u will need a shim or some springs to pressure mount it.

how much paste are u applying?

This post was edited by King Atrhur on Dec 30 2015 06:22pm