Bro you don't need to replace any fans...down the road...IF you decide to really overclock the sucker, just get a few more case fans.

Are the stock fans black though?

these are the fans that can be fitted

it comes with one 140 rear and one 200 front (both seem to be white)



This post was edited by Hermione on Dec 6 2014 03:03pm

If your going to replace them then your looking at replacing them all 3x 140mm top fans 2x140mm front 1x140mm rear and either 1x140mm bottom or 2x120mm bottom.

/edit

Not really necessary but if your gonna do it, go big

This post was edited by Acuity on Dec 6 2014 03:05pm

This case has a front 200mm fan and a rear 140mm fan, bnoth are designed to be quiet...both are white.

http://www.newegg.com/Product/Product.aspx?Item=N82E16811854003


Later on if you want to OC...then you can add a bazillion fans...


Cooling System

120mm Fans
Front: 2x
Top: 3x
Rear: 1x
Bottom: 2x
HDD: 2x

140mm Fans
Front: 2x
Top: 3x
Rear: 1x (included)
Bottom: 1x

200mm Front Intake Fan
1 (included)






Features:
Enthoo Pro includes 1 x 200mm fan in front and 1 x 140mm fan in the rear. Ability to upgrade to additional fans is possible. All fans included are Phanteks’ new redesigned and better performing SP series fans. Budget friendly case, Phanteks’ Enthoo Pro, unleash unlimited possibilities.

Appearance:
-Brushed plastic with an aluminum appearance
-Stealth interior: hidden PSU / hidden HDD

Cooling:
-Extreme cooling capacity
- 2 included Phanteks’ premium fans
- The PWM hub makes it possible to control all the connected fans (also 3-pin fans) with PWM function through 1 PWM connector and create a better cable management.
- Extensive water cooling support. Provides up to 4 different installation areas for slim and thick radiators varying from single to triple (120mm and 140mm form factors). Clearance for push-pull fan configurations.
- Innovative liquid cooling mounting systems: radiator brackets for easy installation

Functionality:
- Closed HDD panel strengthens the chassis’ rigidity, even when both HDD cages are removed.
- Removable Drop-n-Lock SSD bracket that can be installed on 2 different locations. (1 bracket incl.)
- Removable front and rear bottom dust filters for easy maintenance.
- Pre-installed cable management tools behind the motherboard tray that can be fastened and released.
- 2x USB 3.0, 2x USB 2.0, microphone, 3.5mm audio jack



/e If and when you decide to add more fans...we can find them for you. But just to start you won't need any extra fans.

This post was edited by Ghot on Dec 6 2014 03:11pm

Be looking at 100 bucks to replace all fans and get decent ones

This post was edited by Acuity on Dec 6 2014 03:11pm

http://www.phanteksusa.com/products/phanteks-enthoo-pro

PH-F140SP (included fans)

Speed (rpm)

1200±250 rpm
Max Airflow 82.1 CFM
Static Pressure 1.33mm H2O
Acoustical Noise 19 dB





More or less you can do even more fans than I have....









This post was edited by Ghot on Dec 6 2014 03:15pm

Alright thanks for all the help, I'll be ordering Ghot's build as I really like the Asus board look aswell.

I'll try and get all from Canada Computers in Laval if its possible so I dont have to wait too long for shipping.

lol I cheaped out on few of my fans but I have 20 of them 11 front, 4 rear, 2 push, 3 pull

his build is over budget

no room for keybaord or mouse lol