Are you fucking retarded, that is definitely not a Noctua D-15, and 100% sure Cooler Master Hyper 212 Evo.
I've used the Cooler Master Hyper 212 Evo in maybe 9-10 different builds, I know exactly what it looks like.

Did you learn to read yet?

I know exactly what cooler that is. I never said it was a D-15 I just pointed out that it uses a push/pull config in response to your earlier comment.

OMG! you've made 9-10 builds! You're my hero!

Seriously, you're another Johnny come lately that has all the knowledge because Google is so grand.

Did you end up fixing the airflow in your case???

i honestly dont know what you mean
ill just list it and you can point out specifically what i need to do
these are my temps idle or regular use and it's been on + gaming for hours
none of them go past 50 with the most i use it + game recording in 1440p


I have a total of 6 fans
1 exhaust back
1 exhaust top
1 exhaust/radiator front bottom
1 front top flowing in
2 on the cpu heatsink exhausting out to the back exhaust

basically all air coming from the front(with a filter in the front) and coming out the back

Theres nothing I can do about the front bottom since that is the closed loop cooler for my GPU

Which fans and which direction of exhaust do you think I should adjust?

This post was edited by itzpookiie on Feb 22 2016 01:04am

Keep both fans on the front as intake. Top and back should be exhaust. Move the gpu rad to the top or back as exhaust.

I'd have to take the 2nd fan off the cpu heat sink then or it won't fit
Will probably do that

This post was edited by itzpookiie on Feb 22 2016 09:38am

You wont lose much from taking off the second cpu fan. You'll have the back fan.

will do once I get home then

i'd just change the gpu fan to intake, positive air pressure is better imo as you'll get less dust in your pc over time and cooling is the same or better.

Tell me the size of all the fans you have including the ones you have on your CPU Heatsink and I will tell you the best way to set it up.
Also, before you change anything. I want you to run Prime95 and FurMark while monitoring your temps, you can use CPUID's HWMonitor it is better.
Then run them after again you change it as well to see the difference.