4.6

Ok did you change cpu load line to 100% in bios?

No? Isnt even an option as far as im aware.

This post was edited by Criaric on Oct 1 2016 12:48pm

Its in there

GOnna post this here for now while I attempt to see what my LLC is @

https://linustechtips.com/main/topic/24019-load-line-calibration-why-overclockers-should-care/

Seeing as the guy in the thread had the same board as me as well as procressor and was able to get 4.7Ghz OC @ 1.275v with level 6 LLC and didnt have any crash issues ima try Lv6 4.6 1.3. If no crash Ill run another test tomorrow night @ like 1.7v

This post was edited by Criaric on Oct 2 2016 01:48am

Test Ran sucessfully for 7hr 10m and then I stopped it


1.3v
4.6ghz
lv6 LLC
Temps were around 65C when i looked at them @ Hour 7

================================================================
x264-64 Stability test
================================================================

x264 0.148.2597 e86f3a1
(libswscale 3.0.0)
(libavformat 56.21.0)
built on Aug 19 2015, gcc: 4.9.2
x264 configuration: --bit-depth=8 --chroma-format=all
libx264 configuration: --bit-depth=8 --chroma-format=all
x264 license: GPL version 2 or later
libswscale/libavformat license: LGPL version 2.1 or later

==== Configuration =============================================

Log name = x264-log_Test3.rtf
Loops = infinity
Threads = auto
Priority = high

==== Results ===================================================



Start: 2:49:03.60 Sun 10/02/2016

til:
Loop 44: 10:22:26.62

This post was edited by Criaric on Oct 2 2016 09:38am

woah woah woah

1.7v will kill your cpu, i hope that was some kinda typo but idk

never go over 1.4 lol

yea was a typo.