Temps are still reading at 30 degrees even with Oc, need to run a stability test.

Idle temps are completely useless to go off of.

And you'll need to run a stress test for at least 4 hours.

With Cinebench Running, I get 55 Degrees top end



This post was edited by Criaric on Sep 29 2016 05:32pm

Cinebench is crap.


www.overclock.net/t/1570313/skylake-overclocking-guide-with-statistics

Go to here, Click the "Stress testing" tab & download x264.

Ill run it for 6 hours while im asleep and post it in the morning.

Ill never run the CPU @ 100% for an hour so Im pretty fine I would think.

================================================================
x264-64 Stability test
================================================================

x264 0.148.2597 e86f3a1
(libswscale 3.0.0)
(libavformat 56.21.0)
built on Aug 19 2015, gcc: 4.9.2
x264 configuration: --bit-depth=8 --chroma-format=all
libx264 configuration: --bit-depth=8 --chroma-format=all
x264 license: GPL version 2 or later
libswscale/libavformat license: LGPL version 2.1 or later

==== Configuration =============================================

Log name = x264-log_Overnight1.rtf
Loops = infinity
Threads = auto
Priority = high

==== Results ===================================================

Start: 23:38:49.52 Thu 09/29/2016

Loop 1: 23:38:49.53
encoded 2121 frames, 3.27 fps, 35905.40 kb/s

Loop 2: 23:49:38.76
encoded 2121 frames, 3.24 fps, 35905.40 kb/s

Loop 3: 0:00:34.37
encoded 2121 frames, 3.23 fps, 35905.40 kb/s

Loop 4: 0:11:30.33
encoded 2121 frames, 3.26 fps, 35905.40 kb/s

Loop 5: 0:22:20.55
encoded 2121 frames, 3.28 fps, 35905.40 kb/s

Loop 6: 0:33:06.57
encoded 2121 frames, 3.27 fps, 35905.40 kb/s

Loop 7: 0:43:54.78

What is clock voltage and temps?

1.2v , @ 100% load it never topped over 60, avg'd 55

clock?

prolly could go up to 4.2-4.4 with that voltage, if you can get 4.4+ with 1.2 you may have a pretty descent chip

This post was edited by yupitsmeh on Sep 30 2016 07:07am

Ive clocked up up to 4.6 with 1.2