The artic cooler freezer 50 is too big and bulges out of case this cpu cooler was reason my Lenovo died
Think cooler master is cheap looking
Lmk

The Arctic Freezer 50 is 166mm tall.

Noctua NH-D15S is 160mm while the non-S version is 165mm.

Scythe Fuma 2 is 155mm and so is Cooler Master Hyper 212.

You believe cooler master master air is good?

https://www.newegg.com/cooler-master-masterair-g100m-ma-g100l/p/13C-000X-003C1?item=13C-000X-003C1&source=googleshopping&nm_mc=knc-googleadwords-mobile&cm_mmc=knc-googleadwords-mobile-_-pla-_-cpu+cooling-_-13C-000X-003C1&gclid=Cj0KCQiAkNiMBhCxARIsAIDDKNVsWRMDq3kRkEZIVVL_2yj3Bdd2rNFWG6CMYiVU9pVgQkhbyFppugMaAniYEALw_wcB&gclsrc=aw.ds

I'm a bit confused. Help me out here.

You mentioned your Arctic Freezer 50 sticks out of the case. Meaning the cooler height is more than your case width. And it's 166mm.

Now you want to look at the MA620M, which is 165mm tall. Why? What am I missing here?

Oh I didn't know sry
Was looking at that cooler didn't research height thanks

If I buy this case the cooler fits?

https://www.centralcomputer.com/coolermaster-mcb-d500d-wgnn-s01-masterbox-td500-mesh-white-airflow-atx-mid-tower-with-e-atx-support-mesh-front-panel-temepered.html

https://www.coolermaster.com/catalog/cases/mid-tower/masterbox-td500/#specifications

Based on the "clearance - CPU cooler" which shows 165mm, the MA620M should squeeze in.

Ok cool atm can't afford a case plus cooler only $500 budget for a new cpu



This post was edited by MoneyLion on Nov 18 2021 12:16pm

Is there a specific reason you want i9? What's the cost for i7?