overclocking my 9600k, trying to get to 5.0ghz while trying to keep it as close to 1.35v if possible with this chip
i know that theres voltage droop from LLC(set to turbo), however i have bios set at 1.365 @4.9ghz(stable), cpu-z reads it at 1.356v idle and drops down to 1.344v typically underload. im sort of using 1.35v as my threshold give or take some voltage if i can reach 5.0ghz. should i be going by what i am seeing on cpu-z as my accurate voltage or bios?
This post was edited by LittleDickyBird on Jun 23 2021 03:24pm