is this something to worry about?
my cpu isnt going above 40 though but the moba is reaching 50-55

idle it is fine just under a load(outer worlds max setting) it spiked up
it cooled down quickly though after i exited game so thats good :]

edit:GEFORCE RTX 2070 SUPER if relevant

This post was edited by Tittys on Feb 28 2020 07:42pm

Vid card temps are fine. Motherboard temp is a bit high.

think the gpu heat is xfering to the mobo,may need to see what i can do to exhaust it
any recommendations on a gpu cooler?i already have the most fans i can get into it

What case, what mobo, and what CPU cooler?

msi mpg z390 gaming pro carbon ac
Corsair Hydro Series, H100i RGB PLATINUM SE, 240mm Radiator
CORSAIR - iCUE 465X RGB ATX Mid-Tower Smart Case - Black


This post was edited by Tittys on Feb 28 2020 08:34pm

Get SPECCY here: http://www.piriform.com/speccy/download
...get the FREE version from either link listed.
...Speccy is a really nice system hardware/temperature, information Utility.
...simply install it...and run the program...then post a screen shot of the main page of the program.



/e The fans on the front should be intakes, the fan(s) on the top and rear should be exhausts.

This post was edited by Ghot on Feb 28 2020 08:39pm

not sure why its reading the gpu at 4gb instead of the 8gb on speccy



This post was edited by Tittys on Feb 28 2020 08:41pm

Assuming you have the fans on the front as intakes, and the fans on the top and rear are exhausts... then I would imagine the SSD is causing the motherboard temps. SSDs run... hot.


/e Also, try to keep the computer room temps low. Like 60-65F. As for the vid card, you don't really need to worry about it, unless it starts hitting like... 80C.





This post was edited by Ghot on Feb 28 2020 08:51pm

maybe thats my problem then,the m.2 slot is right under my gpu(has a thermal thing to put over it)
i do have another slot avaiable but the motherboard guide said to use that slot first think it would help to move it to the upper slot right above gpu

Did you put the SSD Frozer thing back on after installing the SSD in the lower slot?

This post was edited by Ghot on Feb 28 2020 08:52pm