Potentially building a new PC in the next few months, looking for ideas for next build in terms of case/design.
Open to ATX or ITX.
~$150 USD

Phanteks EVOLV SHIFT

http://www.lian-li.com/pc-o11d-rog/

These are pretty popular and cool

I'm a horizontal mobo cube case person

So not sure if you'd be interested in them

shoebox

Interesting



I've looked at that but it's mostly for custom water cooling, I'm going air cooling.



Like the thermaltake ones?



I said unique not garbage

[QUOTE=zell1luk,Dec 21 2019 06:55pm


I said unique not garbage[/QUOTE]

then a trash can

Nzxt h510 elite is what I used on my build 4 months ago. Imo it's the sexiest case on the market

https://www.bestbuy.com/site/nzxt-h510-elite-compact-atx-mid-tower-case-with-dual-tempered-glass-matte-black/6364329.p?skuId=6364329&ref=212&loc=BM01&gclsrc=aw.ds&ds_rl=1260672&ds_rl=1266837&ds_rl=1260441&gclid=Cj0KCQiAxfzvBRCZARIsAGA7YMwJtfcyXXnYPXQYPkU5w9iNk-g9gD3tHgppbzjic6ZIIYjpXqBLszsaAnamEALw_wcB

Here's my rig I replaced the fans that came with it for some rgb corsair fans to match the rest of my build



This post was edited by infinity. on Dec 22 2019 08:36am

You might like the bit dated bitfenix prodigy case. I built a mITX system in one years ago, was able to get GTX 780 TI in there with closed loop liquid cooling setup on the CPU. It was tight, but mounted a larger fan (200-240mm) on the bottom of the case after cutting out some metal from the bottom of the case for more air flow. Very quite setup overall. When you start cramming a bunch of stuff into a smaller case, then a bunch of small fans, you will soon have a jet engine sound to deal with.

This post was edited by RedFromWinter on Dec 23 2019 11:59am