I had bought and assembled this early December, been working fine until about last week.

at first I found power plug wasn't working, or atleast I thought as I plugged a new power cord in and it worked, however this resulting in me moving the whole case around, so it worked fine.
Then wouldn't work the next day, so I assumed the power button as it was caved in on one side from the start so I assumed it just went out after some time. So I bought an external power button and seems to beable to turn on and off the computer with no issue (again had to move case and such)
today it was off and nothing working so I went in to see if power cables to mother board came undone somehow to find when I slightly nudge the graphics card it would turn on and then off right away, so I have to slightly nudge it and wait until it stays on then put siding back on and it works now to post this.

I couldn't find anything on google that could help or atleast dont know how to do a search for it

So hopfully someone here may beable to help.

its a physical issue so aside from physically rigging something to hold it in place your shit out of luck.
chances are you bent the pci slot when moving it or something to that degree. Could try to RMA mobo if it is though.

I say this assuming you've tried removing and reseating it first.

lol my dumbasss never tired to remove and add it back

and it was having issues before I moved it is the issue lol
i heard that gpus get's a bend over time but normall doesn't effect anything, thanks

if it helps at all this is my setup
https://pcpartpicker.com/list/g7dkmq

This post was edited by lmEmo on Jan 27 2019 07:34pm