Hey guys for some reason I can not get my windows to boot from USB on a ASRock A320M-DGS. I have tried everything and figured I would ask here. I know that it is being picked up because there is an option in the BIOS to download the LAN Driver onto a USB in the event you do not have cd drive which when I check the USB the ASRock folder is there with the driver in it. Any help is greatly appreciated.

Edit: https://www.newegg.com/Product/Product.aspx?Item=N82E16813157767&nm_mc=AFC-C8Junction&cm_mmc=AFC-C8Junction-PCPartPicker,%20LLC-_-na-_-na-_-na&cm_sp=&AID=10446076&PID=3938566&SID=

This post was edited by punkyrus on Jul 28 2017 09:19pm

How are you putting windows 10 on the usb drive?

I used Rufus, it works on another PC in the house and I have used it before with out any problems.

bios?

2.5

try using a usb 2.0 port if your not.
or
a usb 2.o usb drive and not a usb 3.0 device.

I tried using each port front and back. Only reason why I am using a USB is windows 7 kept freezing at install and I only have windows 10 on USB.

Using this USB device

https://www.amazon.com/Dane-Elec-USB-Flash-Drive-ZMP-16G-CA-G2-R/dp/B0029DXWW4

change boot mode to legacy? from uefi.

Yes, I have fast boot disable and have changed it to both legacy/uefi and nothing.

I'd suggest trying another usb device then.