changed it from AUTO to regular (which seems to be disabled)...haven't noticed any difference.

btw i got that on a 3+1 board

hows the undervolt? at stock 3.8 i only need .9 volts

This post was edited by Hermione on Feb 18 2013 12:47pm

still set at 1.3v....I'm gonna let that ride for a cpl days then try 1.25v or 1.20v and another Prime run etc

good luck, i guess you have a lot of time on your hands.

That I do

Hmm.

Why the upgrade?

PiLeDRivEr

/e and since I have a SATA III board now...all my Drives should be SATA III.


This is what I currently have:


WD 300GB Velociraptor - SATA II
WD 1TB Caviar Black FALS - SATA II
WD 1TB Caviar Black FAEX - SATA III

This post was edited by Ghot on Feb 21 2013 10:19pm

Oh I should have clarified... was this planned or spur of the moment or unsatisfied with your previous cpu or...?

Planned....at first the rumor mill had it that the Piledrivers would be delayed and the Radeon HD 8000's would be coming out...apparently....they did the opposite lol

Also, just ordered these...as one of my 230mm x 30mm case fans is dying, and there are three in the case, so...O just ordered three...figure if one is going...the other two shouldn't be far behind lol







Product Features and Technical Details
Product Features

Dimensions (mm) 230x200x30mm
Current (A) 0.38A ±10%
Speed (RPM) 900 RPM ±10%
Air Flow (CFM) 156.27 CFM ±10% / Noise (dB-A) 25.6 dB(A)
Operating Voltage 12VDC / Starting Voltage 5VDC



I wanted black ones but they sold out every where :/

This post was edited by Ghot on Feb 21 2013 11:44pm