There is a softmod that allows you have access 1.3v within MSI AB without any third-party programs etc
Depends if your card is compatible and I'm 99% confident.

http://www.overclock.net/t/1363440/nvidia-geforce-gtx-titan-owners-club/13400%5F100#post%5F20635197

Basically you add either command line into all your profiles within your MSI AB Folder.

C:\Program Files (x86)\MSI Afterburner\Profiles
you must open the VEN_10D......cfg as admin right's

add this line below "msi afterburner must the closed when doing it"

[Settings]
VDDC_Generic_Detection=0
VDDC_NCP4206_Detection=4:20h

or

[Settings]
VDDC_Generic_Detection=0
VDDC_NCP4206_Detection=3:20h

This post was edited by Battleship on Jan 3 2014 06:15pm

Rbby & Zar have both updated their third-party voltage mods for MSI AB 18 also.

ive entered both and get the command back of "invalid", not 41
BUT, it says it only works with 14. Does this work with 16 or 18?



sweet
guess I shall get that
have a link to rbby for 18? or does the original link work for both 15 and 18

This post was edited by Azenor on Jan 3 2014 06:18pm

I'm using AB 16 and it's working for me, although my card runs the reference NPC voltage controller, i swear it is supposed to work with the lightnings although.

Rbby
http://www.overclock.net/t/1398725/unlock-afterburner-limits-on-lots-of-cards-some-with-llc-ab-b-18/0100

Team Skynet
http://www.overclock.net/t/1425102/updated-ab-b18-team-skyn3ts-unlocked-ncp4206-voltage-llc-mod-tool/0100

I use Skynet's although it doesn't allow for Aux nor memory voltage, which doesn't concern me anyway.
You might want to stick with Rbby's.

This post was edited by Battleship on Jan 3 2014 06:22pm

can i ask you guys in general

is it better to max your gpu OC and sacrifice your memory OC?

bc i have like a 1345 gpu oc with a +100 memory OC and my FPS is about .5-.8 lower than yours in valley with that huge memory OC azenor

this is with a 780 lightning

This post was edited by Bubbler on Jan 3 2014 06:26pm

Valley seems to love the memory OC more than core
One of the previous posts I had core over 1.3k yet it really didnt care
Memory will get you further in valley, not sure about others though


e/
OCing your CPU also helps some
I have my 3570k @ 4.8

This post was edited by Azenor on Jan 3 2014 06:27pm

truee

i have my 4670k @ 4.3

should i raise it?

memory is for synthetics. you wont see much gain in games.

so better to max the core and sacrifice the memory for ingame performance?

Valley loves memory clocks, most cards running Samsung/Hynix memory are capable of +700-800 Memory Clock while running Valley.
Core clock is where you'll see your massive scores once the memory is as high as possible.

Remember not all cards take voltage the same, my card for instance prefers less voltage.