The fin density of a 212 isn't enough to warrant a static pressure fan.
I'm in no way saying its not better but I'd be AMAZED to see actual evidence showing a AF vs SP fan showing an actually temp diff of more then 5C on loads.

First off you're wrong. Second, Cooler Master thinks static pressure matters on the Hyper 212 EVO.

Laastly I OWN a Hyper 212 EVO. I've tested it with static pressure fans and with regular case fans.... it matters.

Post prove or stfu imo.

Yeah, do that. Post proof, noob.

I know for a fact it will work just fine with AF fans.
Don't feel like switching out the fan on wifes pc to prove you wrong.

But thankfully with google I don't have to,
https://www.youtube.com/watch?v=FQG67V0m7vU

Now granted this isn't a 212 but a 120 rad.
If you still wanna act like a stubborn mule your more then welcome to provide your own evidence.

/edit

https://www.kitguru.net/components/cooling/dominic-moass/static-pressure-vs-airflow-fans-is-there-a-real-difference/all/1/



This post was edited by King Atrhur on Mar 13 2019 01:16am

Third and last time, kid...


The Hyper 212 EVO is rated at 82.9 cfm. But no CPU fan gets 100%, no matter what the BIOS says. You can discover this yourself by using AIDA64 and monitoring the RPM. Best you can get is about 95%
I have a bunch of Scythe 76 cfm case fans... (no static pressure).

One day while blowing the dust out of the comp, I discovered that the stock fans on the Hyper 212 EVO don't have sealed bearings. Dust got it the bearings and reduced the max. CPU fan speed to like 50%.
I called Cooler Master in California and asked what to replace the fans with. They said the Cooler Master Blade Masters.

They are this fan: https://www.newegg.com/Product/Product.aspx?Item=9SIA1K63550115&Description=cooler%20master%20blademaster%20120mm&cm_re=cooler_master_blademaster_120mm-_-35-103-069-_-Product

...they are 76.8 cfm with 3.90 static pressure.


While waiting for the Blade Masters to arrive, I had to use the Scythe (no static pressure) case fan on the cooler. Temps went up 10C +.

When the blade masters with same cfm arrived, I put one on and the temp dropped 10C +. There isn't much more accurate test you can do. :/

Try and remember this post.....THIS TIME.









/e ....side note:

But the fucking thing ran didn't it.
125w tdp cpu under benches and it was within safe temp range.

This post was edited by King Atrhur on Mar 13 2019 01:30am

Half ass solutions are NOT long term solutions. :/

This would last long term, aside from the fan breaking again.

Yeah, if ya don't mind 10-15C higher temps. This ain't a contest bro. There's a right way and a wrong way. Simple as that. :/