d2jsp
Log InRegister
d2jsp Forums > Off-Topic > Computers & IT > Gfx Card Heating To 60-65 C > Brand New
Prev12
Add Reply New Topic New Poll
Member
Posts: 14,611
Joined: Dec 26 2006
Gold: 174.67
Feb 28 2020 08:52pm
Quote (Ghot @ 28 Feb 2020 21:51)
Did you put the SSD Frozer thing back on after installing the SSD?


yes
Member
Posts: 105,128
Joined: Apr 25 2006
Gold: 10,475.00
Feb 28 2020 08:58pm
Quote (Tittys @ Feb 28 2020 09:52pm)
yes



You're probably fine then. Just keep an eye on that motherboard temp. The SSD might have better air flow in the top slot. But I would imagine the motherboard folks take the SSD temp into consideration.

This post was edited by Ghot on Feb 28 2020 09:02pm
Member
Posts: 57,230
Joined: Oct 14 2010
Gold: 57,480.92
Feb 28 2020 09:00pm
Does MSI have temperature limits anywhere for that board?

Temps look fine.

The only thing I see maybe not getting enough air is the top vrm/soc heatsink because theres really no direct air going through it.
That could potentially get too hot when you overclock
Member
Posts: 105,128
Joined: Apr 25 2006
Gold: 10,475.00
Feb 28 2020 09:03pm
Quote (Applecrack @ Feb 28 2020 10:00pm)
Does MSI have temperature limits anywhere for that board?

Temps look fine.

The only thing I see maybe not getting enough air is the top vrm/soc heatsink because theres really no direct air going through it.
That could potentially get too hot when you overclock





I needed the motherboard max. temps once... I couldn't find the info anywhere. So I called the motherboard company and they had the max. motherboard temps. Just FYI.
Member
Posts: 14,611
Joined: Dec 26 2006
Gold: 174.67
Feb 28 2020 09:05pm
Quote (Ghot @ 28 Feb 2020 21:58)
You're probably fine then. Just keep an eye on that motherboard temp. It might have better air flow in the top slot. But I would imagine the motherboard folks take the SSD temp into consideration.


kk thanks for the help
https://www.amazon.com/StarTech-com-Expansion-Exhaust-Cooling-Connector/dp/B0000510SS
this little cheap thing seems perfect to help exhaust more put it right under my gpu
Member
Posts: 105,128
Joined: Apr 25 2006
Gold: 10,475.00
Feb 28 2020 09:10pm
Quote (Tittys @ Feb 28 2020 10:05pm)
kk thanks for the help
https://www.amazon.com/StarTech-com-Expansion-Exhaust-Cooling-Connector/dp/B0000510SS
this little cheap thing seems perfect to help exhaust more put it right under my gpu




That's probably not necessary.

With the SSD in the top slot, the CPU will run hotter. With it in the bottom slot, the vid card and the motherboard will run hotter.
But like I said...I'm sure the motherboard company has taken the SSD temps into consideration when they made the motherboard.

AIDA64 will show you the SSD temp. And many more temps than Speccy shows.




This post was edited by Ghot on Feb 28 2020 09:15pm
Member
Posts: 3,719
Joined: Feb 8 2014
Gold: 0.00
Feb 29 2020 03:43pm
Under full load - that is absolutely fine. You shouldn't be worried until it hits 90-95c under full load.
Member
Posts: 25,793
Joined: Oct 7 2005
Gold: 9,510.00
Mar 2 2020 11:19am
Better send it to me.
Member
Posts: 14,611
Joined: Dec 26 2006
Gold: 174.67
Mar 2 2020 01:01pm
Quote (Halfdead14 @ 2 Mar 2020 12:19)
Better send it to me.


you got it sent last week!
Go Back To Computers & IT Topic List
Prev12
Add Reply New Topic New Poll