Which Mobo?

It's in the 3rd post

More info, if you get serious...

http://www.overclock.net/t/1621347/kaby-lake-overclocking-guide-with-statistics

So i went in and turned on the OC Genie 4 or w/e in my bios.

In the bios it shows 4.3ghz, when i open speccy it shows 3.8ghz.
When i open task manager It shows this



So im confused, it says 3.8, and then speed 4.25

which one is right?

This post was edited by Nivian on Apr 23 2017 10:49am

use cpuz

Ok so



That looks to be 4.3 then

Guess ill start running Aida 64 for a while see if its ok.

This post was edited by Nivian on Apr 23 2017 10:54am

if p95 runs for even a minute i would consider it stable
unless temps is what you're worried about

i have never made it more than a second or 2 into p95 after all workers started while oc was unstable so that's what I'm going off of. I wasn't aware even a slightly unstable oc could maintain that kind of load for over a minute since the vast majority blue screen after even a partial sustained load

There are other kinds of instability to check for that would be useful to run p95 for longer but voltage isn't one of them imo

This post was edited by DCSS on Apr 23 2017 11:25am

You must not have much experience