Copying from another thread I made on another forum:

Hello.

Currently I have the Electric Drum set called: Roland TD-11K V-Drum
Link: http://www.thomann.de/se/roland_td_1...ompact_set.htm

Since I want to advance my drumming with adding a new ride cymbal and also getting new pads, I need some advice first.

I want my drum set to be similiar with:
Link:
http://www.thomann.de/se/roland_td_1...ompact_set.htm

When I look at my current Drum Set I see that there's a cable called RDB (?) or something like that, I am in school at the moment, so can't look it up. I have also checked the manual and it says that the cable should be tied into the set and not be used.

Will this cable work if I connect it with a Roland CY-13R 13" V-Cymbal?

If not, I would appreciate an explanation on how to add another cymbal without removing another one. I want 2 crash and 1 ride.
Link to the Cymbal:
http://www.thomann.de/se/roland_cy_1...ymbal_ride.htm

When it comes to adding a "floor drum" and two other tom-toms, are these the correct ones, and is it also just to replace the black pads I have?

Roland PDX-8 10" V-Drum x 1 (As the floor drum)
Link: http://www.thomann.de/se/roland_pdx8_10_vdrum_pad.htm

Roland PDX-6 8" V-Drum x 2 (As the tom-toms)
Link: http://www.thomann.de/se/roland_pdx6_08_vdrum_pad.htm


If you would like to reply all my questions I appreciate it a lot. But any other reply that includs advices, tips and other stuff, I would like aswell.

Thanks!

*EDIT* Also, should I add another cymbal stand, and where can I find these? Or can I use a regular for acoustic that I have?