what kind/type/whatever oil would i put in my honda atc (110cc)
also, how do i drain the oil

do i have to do anything to it, once i put the oil in??

why make a brand new thread for this?...

new oil filter when you change it.

should have a bolt on bottom of case somewhere

i'd also use an oil sludge removed while i had the oil out

as for oil you'll be better off googling your exact year model and stuff.

good god mods are trolling hard this morning. nothing to do but nazi it on jsp 24/7?

honda has their own brand of oil. i would suggest using it

This post was edited by JDH on Apr 1 2013 12:43am

Yea! its really cool, and has a little pump built into the jug.

There is a bolt to drain the oil on the bottom towards the front. Its on the same side of the motor as where you put the oil in, and I believe its a 15 mm bolt if my old mans memory serves me correctly. I just run valvoline 10w-30 in mine, never had a problem.

Good idea to run the engine to normal temp to before you change it, makes oil more runny, and will get alot more out of the engine, just make sure there is oil in it before starting it.