d2jsp
Log InRegister
d2jsp Forums > Off-Topic > Sports Coliseum > Motor Sports & Cars > Iso : Intelligent Car Diagnosticians > Nn Grease Monkeys
Prev1234567Next
Add Reply New Topic New Poll
Member
Posts: 80,637
Joined: Mar 25 2006
Gold: 3,188.50
May 31 2013 12:06pm
it sounds like some sort of heat shield to me
Member
Posts: 11,713
Joined: Nov 25 2012
Gold: 1.00
May 31 2013 12:06pm
Quote (iRTB @ May 31 2013 01:05pm)
were any of their CEL on?


no, all explaind - no loss of power, fuel consumption, anything like that. Most said it got worse in 3rd gear, going up hills. shit like that

Quote (TeaRs- @ May 31 2013 01:06pm)
it sounds like some sort of heat shield to me


from what i seen, this was 3-4 peoples problem, they found a rusty shitty bolt they had to tap out and replace - no more rattle

This post was edited by IB0T on May 31 2013 12:08pm
Member
Posts: 24,837
Joined: May 27 2007
Gold: 5.00
May 31 2013 12:07pm
Quote (iRTB @ May 31 2013 01:05pm)
were any of their CEL on?

@OP i couldn't hear it nearly as well as in the first vid..but it was happening the whole time or here and there


Right when it decels. and only in decels. accels nothing. so i still think its something to do with the exhaust. something with the engine giving out fuel to the exhaust is rattling.
that's the only thing i can come up with.

Quote (TeaRs- @ May 31 2013 01:06pm)
it sounds like some sort of heat shield to me


tighten heat shields this morning :(

This post was edited by Bl00dy on May 31 2013 12:09pm
Member
Posts: 80,637
Joined: Mar 25 2006
Gold: 3,188.50
May 31 2013 12:09pm
Quote (IB0T @ May 31 2013 01:06pm)
no, all explaind . no loss of power, fuel consumption, anything like that. Most said it got worse in 3rd gear, going up hills. shit like that


it sounds to me like it hits a sweet spot in the revs causeing just the right ammount of vibration on something, it sounds really light and not like a heavy piece of metal. does the car have a heat shield over the exhaust manifolds?
Member
Posts: 11,713
Joined: Nov 25 2012
Gold: 1.00
May 31 2013 12:09pm
this is the thread i followed, btw. its old, but LOTS of people with this problem.
http://x.nissanhelp.com/forums/maxima/7738-2003-maxima-rattle-rattling-1500-2000-rpm.html
Member
Posts: 12,774
Joined: Apr 23 2012
Gold: 155.00
May 31 2013 12:09pm
start from heatshield and just cuz you can't see anything wrong..try hitting it or shaking it to see if it will....
Cats ever been replaced?
Member
Posts: 24,837
Joined: May 27 2007
Gold: 5.00
May 31 2013 12:10pm
Quote (TeaRs- @ May 31 2013 01:09pm)
it sounds to me like it hits a sweet spot in the revs causeing just the right ammount of vibration on something, it sounds really light and not like  a heavy piece of metal. does the car have a heat shield over the exhaust manifolds?


Yes it does.

Quote (iRTB @ May 31 2013 01:09pm)
start from heatshield and just cuz you can't see anything wrong..try hitting it or shaking it to see if it will....
Cats ever been replaced?


Cat converter was replaced with tranny about 3years ago

exhaust cat, no (only exhaust work was tailpipe)

This post was edited by Bl00dy on May 31 2013 12:11pm
Member
Posts: 80,637
Joined: Mar 25 2006
Gold: 3,188.50
May 31 2013 12:10pm
get someone to get in the car and cause the noise while your under the hood to track it down. it sounds just like a lose bolt to me

there might also be a heat sheild where the manifolds go under the car in the back of the engin*** under the car. did you check those ones?

This post was edited by TeaRs- on May 31 2013 12:11pm
Member
Posts: 24,837
Joined: May 27 2007
Gold: 5.00
May 31 2013 12:13pm
Quote (TeaRs- @ May 31 2013 01:10pm)
get someone to get in the car and cause the noise while your under the hood to track it down. it sounds just like a lose bolt to me

there might also be a heat sheild where the manifolds go under the car in the back of the engin*** under the car. did you check those ones?


the intake manifold heat shield i'll have to take out the intake to get to, but i haven't checked that one, was waiting for my day off to check that. i check the underneath from flex pipe leading to manifold those heat shields were tightened up.

my next day off is sunday, just grabbing ton of ideas and but it all out then.

Thanks again guys appreciate the work.

This post was edited by Bl00dy on May 31 2013 12:15pm
Member
Posts: 80,637
Joined: Mar 25 2006
Gold: 3,188.50
May 31 2013 12:15pm
Quote (Bl00dy @ May 31 2013 01:13pm)
the intake manifold heat shield i'll have to take out the intake to get to, but i haven't checked that one, was waiting for my day off to check that. i check the underneath from flex pipe leading to manifold those heat shields were tightened up.


imo its def one of those. it sounds to much like a heat shield to not be one lol
Go Back To Motor Sports & Cars Topic List
Prev1234567Next
Add Reply New Topic New Poll