d2jsp
Log InRegister
d2jsp Forums > Off-Topic > General Chat > Car Audio > Car Battery/internal Computer System Problem?
Add Reply New Topic New Poll
Member
Posts: 24,837
Joined: May 27 2007
Gold: 5.00
Oct 22 2012 10:42am
Never dealt with this before,

(Gf's 91 corolla)
Car battery Holds charge (13v)
When on car holds charge (14.5v = alternator working fine)
Car only starts with it hooked up to another car (like its being jump, it doesn't need to recharge battery, the car just won't start of its battery)
Then i noticed my car (had 14.5v when i started jump and then went down to 14v when we started her car
(That means her car is being started off my car)
No problems with stater because at hook up there was no problem

Any suggestions?


we were thinking disconnecting the battery and possibly waiting a few hours for the computer to restart


This post was edited by Bl00dy on Oct 22 2012 10:43am
Member
Posts: 20,816
Joined: Dec 23 2008
Gold: 4,250.69
Oct 22 2012 03:14pm
First thing I always do with problems like that is check the fuses and check the battery connections. Not the ones on the terminals, but where the big cables are running (chassis, starter etc).
I had a problem like that once and the ground cable was loose.
Member
Posts: 24,837
Joined: May 27 2007
Gold: 5.00
Oct 22 2012 03:21pm
Quote (dr_deranged @ Oct 22 2012 05:14pm)
First thing I always do with problems like that is check the fuses and check the battery connections. Not the ones on the terminals, but where the big cables are running (chassis, starter etc).
I had a problem like that once and the ground cable was loose.


Just re looked at it and fixed it, i noticed the positive terminal was very lose, tried tightening it bolt was stuck and corroded/rusted re looked at the ground terminal cleaned it all and it started just fine
Member
Posts: 20,816
Joined: Dec 23 2008
Gold: 4,250.69
Oct 22 2012 09:37pm
Quote (Bl00dy @ Oct 22 2012 04:21pm)
Just re looked at it and fixed it, i noticed the positive terminal was very lose, tried tightening it bolt was stuck and corroded/rusted re looked at the ground terminal cleaned it all and it started just fine


Glad I could help ;)
Go Back To Car Audio Topic List
Add Reply New Topic New Poll