d2jsp
Log InRegister
d2jsp Forums > Off-Topic > General Chat > Car Audio > Wiring Question
Add Reply New Topic New Poll
Member
Posts: 12,750
Joined: Dec 4 2006
Gold: 8,410.83
Aug 16 2011 01:02pm
i got this amp


Earthquake

T2000W/4
Number of channels: 4
Max Power output: 2000 Watts
RMS Power 4-Ohm Bridged: 2 x 300
RMS Power 2-Ohm Stereo: 4 x 150
RMS Power 4-ohm stereo: 4 x 100
Damping Factor: >800
Cross over slopes: 24dB/OCT
THD: >0.005
SNR: 90dB
Class: A/B
Speaker Connection: 8 Gauge
Power Connection: 4 Gauge
Input Type: High Level and Low Level RCA


atm its running 4x 6x9's

for now i got kinda crappy front speakers wich runs of my sony h/u 4x52 w mosfet amp

soon im gonna get some better fronts and gonna plug em to an real amp

i was thinking to remove 2x 6x9 and run 4x coxial speakers (2x 4" - 2x 6.5") + 2x 6x9's, or mb keep the 4 6x9 if it can be wired

is it possible to wire 6 or 8 speakers to an 4channel amp as long it fits with ohm load and max watt ?

next im thinking to run 2 tweeters of my h/u

my h/u is sony MEX-BT5100, it says it got 52w max and 27 w rms x 4 @ 4 ohm, build in mosfet amp. is this brigeable if im only gonna run of the 2 channels on it ? and if not will the 52 w be able to run 2 decent tweeters ?

i know it sounds cheap and crappy but i wont be able to use all the power of the amp even with 4 high end 6x9's anyways, so it would safe me so much time + money + trunk space wich there is allmost noone of left now :/

This post was edited by lulzz on Aug 16 2011 01:03pm
Member
Posts: 6,374
Joined: Jul 22 2009
Gold: 0.45
Aug 16 2011 08:41pm
im thinking to run 2 tweeters of my h/u Ive never seen it done but theoretically if you had a crossover isolating the lower frequencies you could. I wouldnt recommend it.

my h/u is sony MEX-BT5100, it says it got 52w max and 27 w rms x 4 @ 4 ohm, build in mosfet amp. is this brigeable if im only gonna run of the 2 channels on it ? and if not will the 52 w be able to run 2 decent tweeters ?

http://www.ecoustics.com/electronics/forum/car-audio/116766.html

Honestly just get another mids and highs amp save yourself the hassle.

This post was edited by kookymunsta309 on Aug 16 2011 08:41pm
Banned
Posts: 48,361
Joined: Apr 7 2007
Gold: Locked
Trader: Scammer
Warn: 60%
Aug 16 2011 09:34pm
Max Power output: 2000 Watts
RMS Power 4-Ohm Bridged: 2 x 300


lol
Member
Posts: 28,651
Joined: Jan 6 2007
Gold: 0.00
Aug 17 2011 12:37am
Max power is 2,000 but it only puts out a total of 600 watts at 2 Ohms? Wow.
Member
Posts: 12,750
Joined: Dec 4 2006
Gold: 8,410.83
Aug 17 2011 07:12am
kooky thx for ur answers ! if im putting the tweeters on h/u for some time i will get an crossover

about the rms w i donnu, mb its underrated ? as far as i heard in my car and around EQ is doing pretty well

ur right, its bullshit like that, i will get an amp for the fronts, its just im doing both new speakers + subs next month so cash is about to run low atm ^^

i asume its possible to wire 4 small cox speakers 2 at each channel and then 2 channels for the 6x9´s, just untill netx month again when i will buy another amp

Go Back To Car Audio Topic List
Add Reply New Topic New Poll