Quote (Subwoofer @ May 18 2013 11:37am)
unless you care about fade/balance you can just wire the speakers up whichever way you want.
each set of solid+stripe color is a set of speakers.
ex: solid purple+purple with black stripe is a positive and negative for one of the 4 speakers.
the black will be the ground
now the red and yellow you can do with trial and error. one is a switch 12 volt and one is a constant 12 volt. the constant is the memory wire and the switch is for turning the head unit on/off.
so if you get these backwards the head unit will stay on constantly..if you get it correctly it will turn on when the car gets turned on and turned off when the car is turned off.
once you get it working in general you can use the balance and fade to wire the speakers in the correct way. ex: fade to rear left and if the front right is what stays on then switch the wires around.
yeah i have a wire testing tool where i ground and aligator clamp and touch the other end to the end of the wire to find with once has power,
I found 1, the red wire on the on harness, but i cant find the other? even with the car running?
without that i doubt i can even turn the deck on