Yea checked all that. If its in safe mode how I can I fix it

It was my amp a piece need to be saunder back in. But can a 1000 waat infinity be good for 2 12s. 1200 waat a speaker

Check fuses. Check battery level. You might have a low battery and it just doesnt even
Push Any power to the subs.

I've done all that

peak watts aren't what you look for. rms watt rating is the rating you use. there is also different power levels at different ohms on the amplifier so final ohm load is dependent on your subs.

give me subwoofer model numbers and amplifier model numbers and i can tell you if they work.

KFC-w3012 is the speakers and the amp I had was kac8014d

I'm sure I can fix the amp somehow tho. I tooked it apart and u know how it has the numbers 1-8 around it or whatever. The 8th one I unscrewed. The transistor piece or whatever uncall it was melted or something

you'll need 800rms@2ohm to power 2 of those correctly.

you need a more powerful amp or you will have the same problem again even if you fix it this time. using an amp not powerful enough to push the subs correctly is bad on the subs and the amp.

Ight

This post was edited by WaR007 on Feb 29 2012 11:08pm