He was lying it wouldn't do a clean 1800rms but he claimed it so I'm going by it lmao... and everyone knows a clipped amplifier will do yield louder results but at the expense of your equipments overall health. and how am I not keeping things straight? I think you're just mixing them up.

and I'm not claiming anything these are real world numbers and examples it's a fact that 1 12" could easily get louder than 2 ATR's for very little more and the performance yield is easily worth it I'm sorry you don't want to be wrong.

Like I said all you need is clamps if you think cutting is the easy part you're a dumbass assembly is by far the easiest part if you have clamps and a helping hand glueing and screwing is nothing unless you're doing 45's, cross bracing, double baffling etc. which prefabs don't have anyways half the time they don't even use .75" MDF.

and the thing is I always see you mention prefabs first and not so much custom enclosures, a few times you've mentioned a custom is better but you never really push it on people I think it should be the standard either buy a good box or don't bump or go buy some xplods you won't get much out of Type R's in a prefab anyways.

You said you've seen 142 @ 1500-1800w. Avoid does 142 @ "1800w" and that chick dide 142 @ 2000w, I'm starting to see a trend man, you think someone buying a prefab is gonna hit anywhere near what these vehicles hit? no...

This post was edited by Hellish Orc on Feb 21 2012 07:47pm

Oh S10's get loud easy man my brother had 2 10" XPLODS in sealed boxes in his extended S10 and hit a 138 lmao try that in a trunk man would be weaksauce.

I had two Orion HCCA's in my truck for a day to test out my friends subs since I had the amp wiring already and when I wired my truck I used 0 gauge so when I upgraded I wouldn't have to rewire, and that shit was stupid loud, but I don't like loud bass. I like clean bass that doesn't drown out my highs and mids.

Orion HCCA's are incredible woofers I've heard 4 of these in person and WOW... Not bagging you at all man if you like your sound that's grand just stating you might not be so happy with the performance if you had an SUV or Sedan. Also I always make sure my mids/highs stay on part with my bass I'm the same way I hate when I can't hear the words.

Iv had my type r's in a blazer and they still sounded just as good.

I doubt that. I've heard my brothers S10 with that weak system slamming hard. then he put it in his new 04 Dodge and it sounds like dogshit and barely moves any air, sounds like a false claim.

This post was edited by Hellish Orc on Feb 21 2012 07:56pm

My system isn't weak lol.

Two type r's in a sealed box running off probably 1200w or less is weak in my opinion man... You can't back up your shit with false claims saying it was as loud in your blazer I've heard the transfer from an extended truck to an SUV and it was weak. You said yourself it was too loud for you so you obviously don't know what "loud" is.

This post was edited by Hellish Orc on Feb 21 2012 08:00pm

It's loud when I want it to be. But like I said I don't want loud bass. And I just ordered a 2000 watt amp about a week ago, but they sent me the wrong amp.

It's two Type R's in a sealed box it really can't get that loud I already told you your saving grace is the S10. If you want to be really loud port it and give them about 800w each I promise you this you're going to blow them off 2000w in a sealed box that's probably a prefab. Also what amplifier is it? is it a true 2000w or is it Boss or something? lol. If you really don't want to be that loud then why are you arguing with me that it's not weak? I consider 145+ to be loud and anything over 150 to be really loud and even louder if it does it below 35hz.

We have different definitions of loud my man. I just urge you not to try to run 2000w to those let alone sealed in a prefab let alone on some cheap 2000w amplifier of those ATR's will turn into Xplods lol.

This post was edited by Hellish Orc on Feb 21 2012 08:05pm