d2jsp
Log InRegister
d2jsp Forums > Off-Topic > General Chat > Car Audio > Total Noob Iso Help
Prev12
Add Reply New Topic New Poll
Member
Posts: 17,077
Joined: Aug 21 2007
Gold: 15,324.00
Mar 6 2013 11:21pm
Quote (Subwoofer @ Mar 7 2013 12:11am)
compared to brick and mortar store prices even with shipping you are saving yourself a lot of money. i doubt it will be more than $30 in shipping.

to get any real low end performance is going to require a subwoofer. door speakers are designed to play mids/highs.

as for specific settings thats going to be something for you to figure out. i can't even remember the last time i used a basic 3 band equalizer. i'm use to have precise settings over specific frequency ranges lol.

if you want to try to get a cheap sub setup:

http://www.sonicelectronix.com/item_63983_Pioneer-TS-W310S4.html
http://www.sonicelectronix.com/item_44472_MB-Quart-ONX2.100.html
http://www.sonicelectronix.com/item_951_Single-12-Sealed-MDF-Subwoofer-Enclosure-Belva-MDFS12.html
http://www.sonicelectronix.com/item_68628_Maxxlink-VPAK-8V1.html

happy to help it gives me something to do when i get bored.


damn... that's gonna add up to like $400-$500 for the sound system LOL
can't afford that yet, I can just get those speakers first and get that sub and amp later on right?

How do you get to use a better equalizer setting? Is it with a higher end head unit?

And are speakers easy to DIY or should I bring it to a professional?
Member
Posts: 32,985
Joined: Mar 17 2005
Gold: 6.00
Mar 6 2013 11:29pm
Quote (1xtimer @ Mar 6 2013 11:21pm)
damn... that's gonna add up to like $400-$500 for the sound system LOL
can't afford that yet, I can just get those speakers first and get that sub and amp later on right?

How do you get to use a better equalizer setting? Is it with a higher end head unit?

And are speakers easy to DIY or should I bring it to a professional?


the speakers are easy to do. at most you'll have to undo a few plastic clips and take out a few screws. wiring them is just 2 wires.

5 band is common on cheaper head units these days but nicer ones have 8 band which i prefer.

and ya the price adds up after a while. $200 for a full sub setup isn't expensive in the long run though.
Member
Posts: 17,077
Joined: Aug 21 2007
Gold: 15,324.00
Mar 6 2013 11:38pm
Quote (Subwoofer @ Mar 7 2013 12:29am)
the speakers are easy to do. at most you'll have to undo a few plastic clips and take out a few screws. wiring them is just 2 wires.

5 band is common on cheaper head units these days but nicer ones have 8 band which i prefer.

and ya the price adds up after a while. $200 for a full sub setup isn't expensive in the long run though.


oh damn... so the head unit I got is pretty outdated huh >.<
It was an okay deal still... $50 and it has bluetooth, aux, usb. Had to get the harnesses and kit and those connectors which totaled another $50

I should be able to do the speakers myself then :)
I think i'm going to be ordering them to niagara or buffalo with some other parts and just cross the border to get em... get a few friends to save on gas too :P

Thanks for all your help!
Member
Posts: 32,985
Joined: Mar 17 2005
Gold: 6.00
Mar 6 2013 11:49pm
Quote (1xtimer @ Mar 6 2013 11:38pm)
oh damn... so the head unit I got is pretty outdated huh >.<
It was an okay deal still... $50 and it has bluetooth, aux, usb. Had to get the harnesses and kit and those connectors which totaled another $50

I should be able to do the speakers myself then :)
I think i'm going to be ordering them to niagara or buffalo with some other parts and just cross the border to get em... get a few friends to save on gas too :P

Thanks for all your help!


not really outdated its just some companies stick with basic 3 bands because most users find anything more to be confusing and unnecessary. there are $800+head units that still use 3 band equalizers.

3 band is fine for most people it just means you can't do fine tuning.

Member
Posts: 17,077
Joined: Aug 21 2007
Gold: 15,324.00
Mar 7 2013 12:25am
Quote (Subwoofer @ Mar 7 2013 12:49am)
not really outdated its just some companies stick with basic 3 bands because most users find anything more to be confusing and unnecessary. there are $800+head units that still use 3 band equalizers.

3 band is fine for most people it just means you can't do fine tuning.


oh i see... well can't do anything about it for now :) lol,

Another question about ohms... how do you calculate that? i think my unit is 4 ohms so I'm able to use 4-8 ohm speakers?
The speakers you linked were 4ohms, would that be each speaker or how to I match it to see if it's fine?
Member
Posts: 32,985
Joined: Mar 17 2005
Gold: 6.00
Mar 7 2013 12:27am
Quote (1xtimer @ Mar 7 2013 12:25am)
oh i see... well can't do anything about it for now :) lol,

Another question about ohms... how do you calculate that? i think my unit is 4 ohms so I'm able to use 4-8 ohm speakers?
The speakers you linked were 4ohms, would that be each speaker or how to I match it to see if it's fine?


thats 4 ohm each speaker. head units aren't rated for less than 4 ohms usually and 8 ohms restricts wattage so you don't want to use 8 ohm speakers.
Member
Posts: 17,077
Joined: Aug 21 2007
Gold: 15,324.00
Mar 7 2013 12:31am
Quote (Subwoofer @ Mar 7 2013 01:27am)
thats 4 ohm each speaker. head units aren't rated for less than 4 ohms usually and 8 ohms restricts wattage so you don't want to use 8 ohm speakers.


so when looking at ohms, i look at to match or be under the ohms of my unit?

i did some youtubing and still unclear, they say usually 2 ohm are good and 4 ohm are usually for people who want to use amp and subs. are all those things referring to the unit or speakers?
Member
Posts: 32,985
Joined: Mar 17 2005
Gold: 6.00
Mar 7 2013 12:37am
Quote (1xtimer @ Mar 7 2013 12:31am)
so when looking at ohms, i look at to match or be under the ohms of my unit?

i did some youtubing and still unclear, they say usually 2 ohm are good and 4 ohm are usually for people who want to use amp and subs. are all those things referring to the unit or speakers?


ohm rating is basically electrical resistance. the higher the ohm load the higher its resistance.

http://www.sonicelectronix.com/item_43129_Hifonics-GLX1400.1D.html

see how the same amp has different power output at different ohm loads? thats basically what you look for on the amp(or head unit).

for the speakers you are looking at right now all of this is a non issue since its standardized to 4ohm speakers and 4 ohm head unit channels.

to get an idea about how speaker ohm loads affect final amplifier ohm loads you can look through this chart http://knowledge.sonicelectronix.com/tools/subwoofer-wiring/

Go Back To Car Audio Topic List
Prev12
Add Reply New Topic New Poll