the stuff i will be reusing are the following

Deck is http://store.sony.com/p/DSX-S300BTX/en/p/DSXS300BTX#specifications Really good for its price i bought 2 years ago still very good options
Subs 2x http://www.jlaudio.ca/car-audio-subwoofer-drivers-w1v2 in a vented Bassworks Box
Amp http://www.alpine-usa.com/product/view/mrp-m500


Now for the new gears

New Power amp Kit custom From Knukonceptz, few things to add still

KFX-AK4 Kolossus Fleks 4 Gauge Amplifier Installation Kit $62.99 $62.99
KNF-23 KonFUSED 3 Way Fuse or Ground Distribution Block (40A,40A,60A) $19.99 $19.99
RT8516BK Gold Plated 8 Gauge Ring Terminal -Black $0.65 x2 $1.30
KOL18BL-20 Kolossus Kable 18 Gauge Blue Primary / Remote Wire 20' $1.40 $1.40
KFX4R Kolossus Fleks Kable 4 Gauge Red Power/Ground Wire $1.55 x4 $6.20
KFX8R Kolossus Fleks Kable 8 Gauge Red Power/Ground Wire $0.69 x8 $5.52
KFX8BL Kolossus Fleks Kable 8 Gauge Blue Power/Ground Wire $0.69 x6 $4.14
KARSS2.6M Karma SS 2 Channel 6 Meter RCA Cable $14.49 $14.49
KARSS2.1M Karma SS 2 Channel 1 Meter RCA Cable $7.49 $7.49

Front Speakers http://store.soundsolutionsaudio.com/products/cz-series-6-5-2-way-component-set.html or
Rear Speakers/Mid Range Drivers 2x http://www.rockfordfosgate.com/products/details/pps4-6

4 Channel Amp 800.4 http://www.mbquart.com/mbquart_onyx_amplifiers.html 100RMSx4

then all the stuff you would need to install this stuff.

i was haveing thoughts about the speakers i was wondering if anyone has heard about these

http://www.mbquart.com/mbquart_premium_speakers.html

http://www.sonicelectronix.com/item_68134_MB-Quart-PVM116.html for the Rear cheaper then the rockfords and i get 2 of em
and for the frount http://www.sonicelectronix.com/item_68133_MB-Quart-PVM216.html

i can swap out the 800.4 for a 600.4

are you planning on going bigger than the sub/amp combo you have right now?

if not the KCA series wiring kit would be fine and cost half as much for the same gauge.

im going for SQ not SPL your saying kca maybe better? i dont plan goiing bigger on my subs amp anytime soon

i like them and what the do, im not that kinda person that likes to feel his piss trying to vibrate out, i listen to ABBA to ZZ top and everything
in between, ya i like a good bass song but the currentl amp and sub combo its working every welll.

This post was edited by DragonSoldier82 on Aug 22 2013 02:55pm

the KCA will be better money wise and plenty of wire for the power you are using. its CCA instead of solid copper wire so its cheaper which makes it ideal for lower power setups like yours.

ya im not in to high power rattlle your head stuff

ok with that being saidi cam up with this

Item # Product Name Remove QTY Price Total
KCA-K4 KCA Complete 4 Gauge Amplifier Installation Kit $26.99 $53.98
KNF-22D KonFUSED 2 Way Digital Distribution System (60A,60A) $19.99 $19.99
KF04 Compression Fitting - Large - 4 Gauge $0.99 $0.99
KARSS2.6M Karma SS 2 Channel 6 Meter RCA Cable $14.49 $14.49
KRD14BL-100 Kord Ultra Flex 14 Gauge Speaker Wire 100' $39.99 $39.99
RT4516BK Gold Plated 4 Gauge Ring Terminal -Black $0.99 $4.95
RT4516R Gold Plated 4 Gauge Ring Terminal -Red $0.99 $4.95


SubTotal:
$139.34

is there anything else i would need?

2 4 gauge kits in to the back of the car in to a 2 way block with a voltage meter then back out still in 4 gauge to both amps

with the 5 of each 4 gauge rings i will do my big 3 with my old 4 gauge wire from 2 years ago

extra 2 channel for the rear speakers. i dont mind spending a little for better kits.

this is the plan i had




or this wireing setup

tem # Product Name Remove QTY Price Total
KNF-22D KonFUSED 2 Way Digital Distribution System (60A,60A) $19.99 $19.99
KARSS2.6M Karma SS 2 Channel 6 Meter RCA Cable $14.49 $14.49
KRD14BL-100 Kord Ultra Flex 14 Gauge Speaker Wire 100' $39.99 $39.99
RT4516BK Gold Plated 4 Gauge Ring Terminal -Black $0.99 $4.95
RT4516R Gold Plated 4 Gauge Ring Terminal -Red $0.99 $4.95
ST168BK Gold Plated 16 Gauge Spade Terminal - Black $0.25 $0.25
ST168R Gold Plated 16 Gauge Spade Terminal - Red $0.25 $0.25
KCA-PK0 KCA 1/0 Power Amplifier Installation Kit (150A) $54.99 $54.99
KCA4BL KCA Kable 4 Gauge Ultra Fleks Blue CCA Power / Ground Cable $0.95 $7.60
KCA4BK KCA Kable 4 Gauge Ultra Fleks Black CCA Ground Cable $0.95 $5.70


SubTotal:
$153.16

0/1 wire to the back in to a 2 way with voltage then 4 gauge to the amps?

This post was edited by DragonSoldier82 on Aug 22 2013 03:58pm

either is a good choice.

the price difference is negligible and 1/0 gauge run will futureproof your setup.

So this is good??

Item # Product Name Remove QTY Price Total
KNF-22D KonFUSED 2 Way Digital Distribution System (60A,60A) $19.99 $19.99
KARSS2.6M Karma SS 2 Channel 6 Meter RCA Cable $14.49 $14.49
KRD14BL-100 Kord Ultra Flex 14 Gauge Speaker Wire 100' $39.99 $39.99
RT4516BK Gold Plated 4 Gauge Ring Terminal -Black $0.99 $4.95
RT4516R Gold Plated 4 Gauge Ring Terminal -Red $0.99x4 $4.95
ST168BK Gold Plated 16 Gauge Spade Terminal - Black $0.25 $0.25
ST168R Gold Plated 16 Gauge Spade Terminal - Red $0.25 $0.25
KCA-PK0 KCA 1/0 Power Amplifier Installation Kit (150A) $54.99 $54.99
KCA4BL KCA Kable 4 Gauge Ultra Fleks Blue CCA Power / Ground Cable $0.95x8 $7.60
KCA4BK KCA Kable 4 Gauge Ultra Fleks Black CCA Ground Cable $0.95x6 $5.70
KOL18BL-20 Kolossus Kable 18 Gauge Blue Primary / Remote Wire 20' $1.40 $1.40
KARSS4.6M Karma SS 4 Channel 6 Meter RCA Cable $22.49 $22.49


SubTotal:
$177.05

are you just doing direct bolt grounds now?

you only have 1 distribution block on your list is why i ask.

aside from that ya that looks fine.

i was going to drill a hole and put in a grounding bolt/stud 5/16 threaded bolt abpout 2 inches long with washers, lock washers and a few nuts

2 to hold it in and 2-3 more with smaller washers for addon ground if need, im going from 1 spot for the ground points around 2 feet from either side

that 5 foot 0/1 gague will be nice for a 2-3 foot battery to chassis ground a 1.5-2 foot chassis to engiine ground
i may get a 5 foot cable for my alt to battery

make sure you remove the paint from the ground spot as well.

if you are going 1/0 gauge on the main wire you may as well order some 1/0 for the big 3 upgrade as well. its kind of backward to have a power wire for the amps larger than the power wires for the base electrical system.