Quote (SIKKaudio @ Jan 16 2021 07:12pm)
I was morecurious about starting up a mining rig. I got all the parts installed n such but thanks for le info :D ill use it for sure
Try nicehash for begineers easiest way to start into the cryptomining world ---> Lets you understand a bit how cryptomining works.
After that, read about rigs, check videos, find what and what not to do.
My only issue when I started rigs is getting some wrong parts.
You need : Rig frame, GPU's, Motherboard (6+GPU slot), Processor+fan (Check correct socket for your motherboard), 8gb+ Ram (Check correct DDR# for your motherboard), GPU Risers, (I suggest the 6pins to Sata(Male) or Molex to Sata(Male) ), Ethernet cable, Power supply ( Very important to make sure you have enough power+wires ), SSD for windows (120GB) or 32gb usbkey HiveOS etc (Read on that)
Optionnal : If you use 2 Power Supplies, you will need a Dual PSU Wire, or card, so they start at the same time. You may need a PWR Switch but you can jumpstart with a screwdriver ( Videos on how to do that ), You may need 120MM fans to blow air away if cards heat too much.
May forget some stuff, but definitely go see Nicehash before you go on making a rig.
This post was edited by idjsp on Jan 25 2021 07:46am