I need a square design that is to be used on a branding iron.




Artwork needs to be 12cmx12 so i can scale down

Down want complex design mainly text with some simple lines or curves

it needs to say:

Handcrafted by
Karl Spinks



Let me know if you need more details

Here is a 12x12cm design I came up with. Let me know.

Quick sample, more details and I could make something a bit better.

If you specifically need square lmk and I will give you a new one.

This post was edited by clume on May 25 2020 03:39pm

Gonna try something in couple of hours.

Hi all,

thanks so far,

it needs to be simple ideally with block writing as it will be cnc'd into brass, so small intricate lettering is out. Sorry should have mentioned this, want it to fill as much of the square as possible

I was thinking some thing design wise similar to this (also think handmade is better than handcrafted:


HANDMADE
__________

By Karl Spinks

in a box.

This post was edited by wezman on May 26 2020 03:32am

A couple more attempts with your previous comment in mind:

More, "block-ish" lettering ?

this one best so far via pm

thanks for tries so far, will wait see if i get a better than this one if not is the winner

Just make sure the icon is self drawn and not googled. You don’t wanna get sued!

Not to bum you out but This logo is a straight copy.

https://pix10.agoda.net/hotelImages/567/5678754/5678754_19080200253620950741074.png?s50x50

E: if you want I’ll make you an original design selfdrawn, that you can use for real, but not for 200 buddy!

This post was edited by 037 on May 26 2020 10:01am