d2jsp
Log InRegister
d2jsp Forums > Off-Topic > Sports Coliseum > Motor Sports & Cars > The Roadrunner Says
Add Reply New Topic New Poll
Member
Posts: 17,247
Joined: Oct 19 2007
Gold: 484.02
Aug 15 2017 08:46am
Meep meep,

Pyooooonngg


Member
Posts: 21,511
Joined: Oct 2 2006
Gold: 1,322,460.00
Aug 15 2017 03:48pm
better pully up for tx2k :unsure:

Sounds good though!

This post was edited by jimmyhoud on Aug 15 2017 03:48pm
Member
Posts: 17,247
Joined: Oct 19 2007
Gold: 484.02
Aug 15 2017 08:44pm
Quote (jimmyhoud @ Aug 15 2017 04:48pm)
better pully up for tx2k :unsure:

Sounds good though!


It was spinning in 2nd. I'm doing drag spindles and a 15" wheel conversion soon. Either Weld S76 or Weld S77 on the rear and I'm not sure on the fronts yet. I sold my 16" CCWs so I need 2 sets of 15" rears. I need a beadlock for the drag strip so I'll grab a set of rear prostars or racestars for that.


I have some secret squirrel stuff that I can't fully divulge because of spies on jsp. G14 classified etc.




Edit: 2nd gear does 98mph with the new trans and a 27" tire. I was at 5000rpm/70mph starting that pull and I shifted at 6500/94mph 2.1sec after I moved the throttle. Having logs of everything is nice. Rear wheel speed went from 70mph to 87mph in .6 sec and front wheel speed was still 76mph. Then it hooked. She is giving the 315/35/18 drag radials more than they can take.

This post was edited by FMX_89 on Aug 15 2017 08:54pm
Member
Posts: 21,511
Joined: Oct 2 2006
Gold: 1,322,460.00
Aug 15 2017 09:22pm
I've got a pair of magnums sitting in the shop that I no longer have a car for.

15x10 with 325/50 hoosier dr2's

They are a 5x4.75 so should fit if I'm not mistaken?
Member
Posts: 17,247
Joined: Oct 19 2007
Gold: 484.02
Aug 15 2017 09:36pm
Quote (jimmyhoud @ Aug 15 2017 10:22pm)
I've got a pair of magnums sitting in the shop that I no longer have a car for.

15x10 with 325/50 hoosier dr2's

They are a 5x4.75 so should fit if I'm not mistaken?


Whats the offset or backspace?
Member
Posts: 21,511
Joined: Oct 2 2006
Gold: 1,322,460.00
Aug 16 2017 11:05am
Quote (FMX_89 @ Aug 15 2017 10:36pm)
Whats the offset or backspace?


should be 4.75 iirc
Member
Posts: 17,247
Joined: Oct 19 2007
Gold: 484.02
Aug 16 2017 11:10am
Quote (jimmyhoud @ Aug 16 2017 12:05pm)
should be 4.75 iirc


I need a 7"-8" backspace
Member
Posts: 21,511
Joined: Oct 2 2006
Gold: 1,322,460.00
Aug 16 2017 11:11am
Quote (FMX_89 @ Aug 16 2017 12:10pm)
I need a 7"-8" backspace


You tubbed in that far?
Member
Posts: 17,247
Joined: Oct 19 2007
Gold: 484.02
Aug 16 2017 07:03pm
Quote (jimmyhoud @ Aug 16 2017 12:11pm)
You tubbed in that far?


Stock C5 setup. 15x10, 7.5" BS puts the wheel in the stock location.
Member
Posts: 11,464
Joined: Jan 13 2008
Gold: 139.25
Aug 19 2017 11:14am
shit, im mad jelly
Go Back To Motor Sports & Cars Topic List
Add Reply New Topic New Poll