d2jsp
Log InRegister
d2jsp Forums > Off-Topic > Computers & IT > Computer Building > Eek's Step By Step Guide To Building Your Own PC > With Pictures. -= Noob Proof =-
Prev123418Next
Add Reply New Topic New Poll
Member
Posts: 16,893
Joined: Aug 25 2005
Gold: 8,601.26
Aug 7 2009 01:26am

If your case supports front panel audio/ usb connectors. You will need to plug them into the corresponding areas on the motherboard..

For sound (HD Audio or AC97).. the slots are usually right around the audio jacks on the motherboard. Plug them in slots like these.


For USB. plug them into the yellow slots that's labeled USB_1/ USB_2 etc etc


DO NOT EVER EVER plug usb headers into 1394 slots, they look exactly like usb slots.. if you do.. you'll kill your motherboard.

Member
Posts: 16,893
Joined: Aug 25 2005
Gold: 8,601.26
Aug 7 2009 01:26am

Step 11: Install your GPU (Graphics card) into the PCI-E x16 Slot (The longest horizonal one. Use the top most slot)
------------I forgot pics for this slot too /facepalm------------------

Step 12: Connect your data sata cables.

Like this


Into a slot like the yellow ones on the motherboard.


Step13: Give power to your devices.

Plug in these sata power cables to your optical drive and Hard drive.

Member
Posts: 16,893
Joined: Aug 25 2005
Gold: 8,601.26
Aug 7 2009 01:27am

Back of optical drive. Left is power and right is for data.


Same way for hard drives.


Give power to your Graphics card (If it requires, some cards will only use 1x 6pin. some will use a 8pin and some will require a 6 and a 8pin).

Member
Posts: 16,893
Joined: Aug 25 2005
Gold: 8,601.26
Aug 7 2009 01:27am

Step 14: Plug in your case fans.

If your case fans has a 3 pin connector like the ones shown below


Connect them to the 3pin fan slots on the motherboard. ( you can use NB_FAN, SYS_FAN etc etc. it doesn't matter.. use whatever is closest.)


If your case fan has a molex connector like these

Member
Posts: 16,893
Joined: Aug 25 2005
Gold: 8,601.26
Aug 7 2009 01:28am

Plug them into the power supply molex connectors/


Step 15: Putting the panels back on..

Once it's back on.. VOILA. Your pc is ready for OS installation!!


Step 16: Install your progs and games and frag away!! Enjoy ;)

Member
Posts: 15,434
Joined: Jul 4 2006
Gold: 0.08
Aug 7 2009 02:08am
thanks for the guide :) can u tell me something

This post was edited by iceT on Aug 7 2009 02:09am
Member
Posts: 10,172
Joined: Sep 4 2008
Gold: 11.50
Aug 7 2009 03:20am
Very nice man.

/edit: did you buy these parts solely to do your guide?

/edit2: is this the "big thing" you were talking about on steam?

This post was edited by PENandPAPER on Aug 7 2009 03:21am
Member
Posts: 6,541
Joined: May 19 2009
Gold: 645.00
Aug 7 2009 04:37am
Bookmarked!

I'm gonna need this for when I get my new case :D
Member
Posts: 35,044
Joined: Jun 18 2008
Gold: 0.00
Aug 7 2009 04:58am
This us a good guide, it will help quite a few people. :)
Member
Posts: 10,614
Joined: May 4 2003
Gold: 3.02
Aug 7 2009 07:27am
Excellent work.

For anyone nervous about doing something like this for the first time, 2 years ago I built my own PC for the first time using a somewhat similar guide and it went off without a hitch. And this one is even better.

This post was edited by downloads_plz on Aug 7 2009 07:27am
Go Back To Computer Building Topic List
Prev123418Next
Add Reply New Topic New Poll