https://imgur.com/a/0Khy1https://imgur.com/a/0Khy1[/URL
Got the big gap motor swapped with a new style motor, rebuilt to a 15 so subs are good, have all my amps and wire, got accordion boot and paired 8gauge coming and I believe that's it, I mean we're gonna play with the box once we get it installed looking for gains but not much work left to do but cut the truck and build the trim inside

Just wanted to sorda do an update, box is attached

This post was edited by TanKiE on Feb 1 2018 08:56am

dayum how many cu. ft. and hz this gonna come out to?

Its about 3.5 sealed, 10.5 ported, will actually be a little more like 10.39 or so ported, I got lazy and didn't want to make the back wall removable, so subs now load from the front lol tuned to around 43hz with I wanna say 170" of port area

Quad baffle double layer, will also have 3" dowel bracing

This post was edited by TanKiE on Feb 3 2018 07:17am

Jesus

6th orders sound amazing and those single cabs sound louder than walls sometimes especially with the power you have.

Ended up doing 4th, we'll see how she does

Definitely looking for mid 150s, If everynthing works out

This post was edited by TanKiE on Feb 3 2018 06:07pm

https://imgur.com/a/mCTbp

https://imgur.com/a/ypa2d

https://imgur.com/a/5exha
https://imgur.com/a/SabcB

Bpillar need to get body worked, pwx 6.5 and ft1


Door plans have changed also, planning on running a pwx 6.5 and a d250 in each door

This post was edited by TanKiE on Feb 3 2018 08:46pm

https://imgur.com/a/0SoxN

https://imgur.com/a/MDmjV

It's in, it's super flat, gonna mess around with the same meter today and see what we can put up, I'm gonna shove some towels between the port and the accordion boot, still haven't even trimmed it out, did a 45 at 37 on a sweep and is real flat on the meter, only on one amp, it's just not enough power lol but early results are good, this thing should do good numbers and be hella flat when we're all done, not gonna mess with the box or port or anything till I get it on both amps, gonna strap at .7 and see if I can get these things going

This post was edited by TanKiE on Feb 10 2018 08:33am

So ended up hanging at crescendo and metering again, got a 147 at 38 iirc, really flat like a 45-47 from 25-50 only played around for like 10 minutes, holding 13.2 at idle, ces 300 amp doing the work
Gotta buy screws and get my hydraulic crimper from my buddies shop and wire the battery bank and the bass amps in the bed next week, still haven't decided weather or not all the mids amps will go back there or not, but if they fit.. probably, cause the 1600 is as big as my 3500s and they ain't fitting lol
Still on one amp, only one run of wire single inputs ect ect excuses excuses, will update as I progress

Moving air tho, she'll float a Wendy's cup lol

This post was edited by TanKiE on Feb 10 2018 05:19pm

only a 147 on 7k in a blowthrough? seems like there has to be room for improvement especially if its in a 6th. i hit a 146.3 @ 28 hz with 3 dick long designs (dave leib ofc) SA 12s off of a sk 3500 wired at .67 dropping to 11.9 and box rise to 1.3 in a ported box tuned to 32 from the trunk of my vic