Ok lol

One question, I can put all parts and then do the cables? Or it's there an order like before adding the GPU I should connect some things ?

And for the PCU it came with a plastic protector I think I need to use, but some other people doesn't use that plastic thing

This post was edited by xPudgEx on Oct 11 2015 01:31pm

You can do all the cables last there's no order

Whats a PCU, the processor or your power supply? That typo could've went either way lol

This post was edited by BluntsGLI on Oct 11 2015 01:36pm

Yeah lol was driving I meant the CPU

Another dumb question

I installed my SSD, but I don't know which screws and where they go for the HDD

So is the black plastic cover you're talking about the one on the motherboard in the socket? If so, just leave it in and what will happen is that it'll pop off once you place in your cpu and close the arm that locks it in.

I'm not exactly sure how your case is but mine has a weird locking mechanism in the cages for the hdd, two wings come out the side and then you put the hdd and close up the wings to lock it in. Check the manual it came with to see if it has instructions for installing an hdd

For the CPU it had a plastic cover I removed but in my mobo accessories it had another plastic one that I think it's used to hold better the CPU, but it fits either way, with or without

Yeah u don't want it there cause the block from your cpu cooler needs to make direct contact with the IHS on the cpu

Ok i have some questions :/


How I know where to put this cables




And also I plugged only 1 cable to both of my hard and solid drives but I saw in instructions there should be another cable for them but I think I don't have the cable, or it should be with my power supply cables ? Because I can't really find it I'll add pic



And does the cable that is labeled pci is the one for the GPU? It say PSU on one side and on the other PCI


So far it looks like this



This post was edited by xPudgEx on Oct 12 2015 06:25pm

Most of this info, is in the motherboard manual bro.

I uses the manual but it doesnt say where the power stw goes it only say about the reset stw or w/e the name is

It also doesn't say about the PCI cables :/

This post was edited by xPudgEx on Oct 12 2015 06:37pm