Im trying to install this car alarm system

i need a how to for DUMBIES

i have a few diagrams from the car manual but im still clue less. i need some one to write me up a instructions. i will go install it and if it work the 1,000fg is yours!


http://faculty.ccp.edu/faculty/dreed/Campingart/jettatech/alarmtext.htm

Above info for where the wires are inside the car and what color they are

http://www.modifiedlife.com/car-alarm-wiring-diagram-and-car-wire-schematics-1994-volkswagen-jetta/

2nd source for info on what wires are inside car and what color they are



i also have car manual with more diagrams if you need me to upload ( that is for what wires are in the car)



now below are the 3 pics for the instruction for the car alarm

(not at bottom of the pic there is a page number. pics are taken out of order.)










so what i need is for you to guide me on what wire goes were!
i do not have power windows so if thats an option i do not need it




Please make the guide like this

Start with the guide for car alarm page 05

[From car alarm] Orange (central locking) = [Inside car] (what color the wire is) Located at driver kick panel




so u just work your way down each wire. listing what color is is on the car alarm and what color it is in the car and were that wire is located!



MAKE 1.000fg fast guys



lets me know what wires are needed to be cut and what ones just spliced

if some one can come up with this in the next hour

its 12:05 here

if its correct and done by 1:05 ill pay double

So youre wanting to pay like ten buks on here to have someone do the hard part... should offer all of youre fg imo

or take it to a shop for 50bux

thats not the hard part lol. its very easy for some one who can read diagrams...

Pretty self explanatory imo..
hard part would be locating the wires in your car to t-tap into

Whats funny is if someone tells you how to wire it wrong, the chances of you decapitating yourself with your airbag are...well....Good.
(Source: Used to be a car audio Installer for best buy)

thanks for the info

fortunate for me im a mobile mechanic so i already disabled the. air bags and battery




yah i cant seem to figure it out so any info will be rewarded.
i have the diagrams from the car repair manual for some on e who really wants to make the fg

i can not figure out the central lock at all

This post was edited by KamelRed408 on Apr 24 2014 06:19pm

also i have a postive trigger just found out




http://forums.d2jsp.org/topic.php?t=70652633&f=136




so far i have found out i have positive central locking


so far i found these wires connect to (start from top of diagram with central locking wires)


Wire From Car Alarm ////// Wire From Car


Orange = ??
White = Yellow/Red or Gray (lock door)
Yellow = ?? (connect to 12v supply)
Orange/Black = ???
White/Black = Red/Black or Green (unlock Door)
yellow/black = ?? (connect to 12v supply and the yellow car alarm wire?)

Black = Ground (connect to any bear metal )
Red/Black = Trunk output (i do not need)
Red = Red (Constant 12V+ Wire Location: Ignition Switch Large Harness)
Pink = Red ( for car siren)
Brown = ??
Brown = ??




Yellow = ??
Red= Windows down (i do not need)
Orange= ??
blue = ??
white= Black/Yellow (Accessory Wire Location: Ignition Switch Harness)

This post was edited by KamelRed408 on Apr 24 2014 07:05pm

So if it was me...

Of match the colors left over.

The two brown ones I'd put with the ones with black in them.

But that's just me.

so far i have found out i have positive central locking


so far i found these wires connect to (start from top of diagram with central locking wires)


Wire From Car Alarm ////// Wire From Car


Orange = ?? ( i think i just leave this alone)
White = Yellow/Red or Gray (lock door)
Yellow = red (connect to yellow/black car alarm wire) (Constant 12V+ Wire Location: Ignition Switch Large Harness)
Orange/Black = ??? ( i think i just leave this alone)
White/Black = Red/Black or Green (unlock Door)
yellow/black = red (connect to 12v supply and the yellow car alarm wire?) (Constant 12V+ Wire Location: Ignition Switch Large Harness)

Black = Ground (connect to any bear metal )
Red/Black = Trunk output (i do not need)
Red = Red (Constant 12V+ Wire Location: Ignition Switch Large Harness)
Pink = Red ( for car siren)
Brown = ??
Brown = ??




Yellow = ??
Red= Windows down (i do not need)
Orange= ??
blue = ??
white= Black/Yellow (Accessory Wire Location: Ignition Switch Harness)